Just in
TechGoogle AI Threat Tracker Finds Exploits Run With No Human in the LoopTechJD Earnings: Q3 Net Income Rises 23% on 3.5% Revenue GrowthTechBank Outage Today: Chase, Bank of America, Wells Fargo Users HitTechBlackstone Amazon Data Center Deal: BXDC Takes 75% of 13 Sites for $5BTechNationwide Emergency Alert Test Set for Nov. 17 at 2:20 p.m. ETTechXPeng Earnings: Q3 Revenue Rises 19% to $3.62 Billion
Tech · Guide

How to Reset a Router (and When a Restart Is All You Need)

A restart fixes most WiFi problems and keeps your settings, while a factory reset wipes everything. Here is how to do each one on common home routers and provider gateways.

USA Publishing Group7 min read
Share
A white router with Ethernet and power cables plugged into its back ports, ready for a restart or factory reset
Photo: User_Pascal / Unsplash

Key takeaways

  • A restart keeps your WiFi name, password and settings, while a factory reset erases them and returns the router to its label defaults.
  • When restarting a separate modem and router, unplug both, wait about 30 seconds, then power the modem first and the router second.
  • Reset button hold times vary by brand: NETGEAR says about 7 seconds, TP-Link more than 10 seconds and the Verizon Router 15 seconds.
In this story 6 sections
  1. Restart or factory reset: pick the right one first
  2. Before you start
  3. Stage 1: Restart your modem and router
  4. Stage 2: Factory reset your router
  5. Stage 3: Set the router up again
  6. When resetting does not fix it

Your WiFi dropped again, the streaming app is spinning, and someone in the house says "just reset the router." Before you grab a paper clip, know that there are two very different fixes hiding behind that phrase. This guide shows you how to reset a router the gentle way (a restart, which keeps every setting) and the drastic way (a factory reset, which wipes it back to the day it left the box). It is written for anyone with a home modem and router, or a single gateway box from a provider like Xfinity or Verizon. A restart takes about five minutes. A factory reset plus setup usually takes 15 to 30.

Restart or factory reset: pick the right one first

A restart (also called a reboot or power cycle) turns the equipment off and on again. Your network name, WiFi password and custom settings stay exactly as they were. This is the fix for slow speeds, dropped connections and devices that refuse to connect.

A factory reset erases your configuration. NETGEAR's support article says a reset clears the admin user name and password, the WiFi network name (SSID) and the security settings. TP-Link's reset guide adds Internet settings, port forwarding rules and parental controls to that list, and warns that a factory reset cannot be undone. Use it only when you have forgotten the router's admin password, the router is behaving badly after a restart, or you are giving the device away.

If you are not sure which you need, start with a restart. Most problems end there.

Before you start

  • Find the label on the bottom or back of your router. It lists the default WiFi name, WiFi password and admin login, and you will need these after a factory reset.
  • If you have a phone line through your internet provider, expect it to go down. Xfinity notes that its Voice service, including 911 calls, is unavailable until the gateway is back online.
  • For a factory reset, have a paper clip or pin ready, and back up your settings first if your router's app or web page offers a backup option.
  • Write down any custom WiFi name and password you use now, so you can recreate them and avoid reconnecting every device.

Stage 1: Restart your modem and router

If you have a separate modem and router

  1. Unplug the power cable from the router, then from the modem.
  2. Wait at least 30 seconds. NETGEAR recommends this wait so the equipment fully powers down.
  3. Plug the modem back in first and give it a couple of minutes until its lights settle.
  4. Plug the router back in.
  5. Wait a minute or two, then test the connection on a phone or laptop.

The order matters. The modem has to finish connecting to your provider before the router asks it for an internet address. If you are fuzzy on which box is which, our guide to modem vs router explains what each one does.

If you have a single gateway from your provider

Many cable and fiber customers have one box that acts as both modem and router. Provider apps are the easiest route here:

  • Xfinity: In the Xfinity app, tap the WiFi icon, choose Troubleshoot, then Restart your Gateway. If that does not work, Xfinity's restart guide says to unplug the power cable, wait one minute and plug it back in. The company notes a full restart can take up to 12 minutes.
  • Verizon Router (Fios): Verizon's router FAQ says to press and hold the Reset button on the back for 3 to 5 seconds to reboot, then wait until the Internet light is solid white. Hold it only that long, because a longer press does something very different (see Stage 2).

For other boxes, unplugging the power, waiting 30 to 60 seconds and plugging it back in works the same way.

Stage 2: Factory reset your router

Do this only after a restart has failed, or when you truly need to wipe the settings.

Using the reset button

  1. Leave the router plugged in and powered on. The power light should be on.
  2. Find the button marked Reset or Restore Factory Settings. It is often recessed in a small hole on the back.
  3. Press and hold it with a paper clip. How long depends on the brand:
  • NETGEAR: about 7 seconds, according to NETGEAR's knowledge base. NETGEAR's own blog notes some models need at least 10 seconds, so hold longer if nothing happens.
  • TP-Link: more than 10 seconds, releasing when the SYS light changes from a slow flash to a quick flash. On models with a combined WPS/Reset button, a press under 5 seconds only starts WPS.
  • Verizon Router: 15 seconds with the pointed end of a paper clip.
  1. Release the button and leave the router alone while it restarts. Do not unplug it during this time.

Using the router's app or web page

If you can still log in, you can reset from software instead. On TP-Link routers, for example, the path is Advanced > System Tools > Backup and Restore > Factory Restore in the web page at tplinkwifi.net (some models show System instead of System Tools). Other brands put the option under a similar Settings, Administration or Maintenance menu.

Stage 3: Set the router up again

After a factory reset, your router is back to its out of the box state.

  1. Connect to the default WiFi network printed on the label, using the default password on that same label. You can also plug a laptop in with an Ethernet cable.
  2. Open the brand's app or setup page. NETGEAR's default admin login after a reset is "admin" for the user name and "password" for the password; TP-Link's defaults are also on the bottom label.
  3. Change the admin password right away.
  4. Set your WiFi name and password. If you reuse the old ones exactly, your phones, TVs and smart speakers should reconnect on their own. If you pick new ones, each device has to join again.
  5. Check for a firmware update. NETGEAR recommends getting the latest firmware after a reset.
  6. Turn back on anything extra you used, such as parental controls or security add ons. NETGEAR notes services like Armor and Smart Parental Controls must be reactivated.

This is also a good moment to tighten your settings. Our walkthrough on how to secure your WiFi router at home covers the ones worth changing.

When resetting does not fix it

If the internet is still down after a restart and a reset, the problem may not be your router at all.

  • Check the lights. A modem that never shows a solid online light usually means a problem on the provider's side or with the cable coming into your home. Our guide to router lights meaning decodes the colors.
  • Check for an outage. Your provider's app or website usually shows service problems in your area.
  • Test with a cable. Plug a laptop straight into the router or modem. If wired works and WiFi does not, the issue is wireless range or interference.
  • Rule out slow speed versus no connection. If you are online but crawling, work through our fixes for why your internet is so slow, or start with the broader internet not working fixes if nothing loads at all.

Call your provider if the modem will not come online after a restart, if your equipment is a rental gateway they manage, or if the box gets hot, smells or has no lights at all.

One last habit worth keeping: before you ever hold that reset button again, take a photo of your router's label and your current WiFi settings. It turns a frustrating half hour into a five minute job. More home network help lives in our tech section.