Just in
AIGenie 4 Now Available to Google AI Ultra Subscribers in Project GenieAICloudflare Clairic Goes Open Weight, Adds 9B Clairic-flash ModelTechGTA 6 Is Out Now on PS5 and Xbox Series X|S, Priced From $79.99TechAlibaba Earnings Show 53% Cloud Growth in September QuarterAIGemini 4 Neon Benchmarks, Price and Who Can Use It NowTechPalo Alto Networks Earnings: Q1 Revenue Up 39% to $3.44 Billion
Gadgets · Guide

How to Use Apple Pencil: Pairing, Gestures and Scribble

A step by step guide to pairing and charging every current Apple Pencil, setting up double tap, squeeze and hover, and writing with Scribble on iPad.

USA Publishing Group7 min read
Share
Black iPad next to an Apple Pencil, the stylus this guide shows how to pair, charge and use with Scribble
Photo: Luiz Felipe / Unsplash

Key takeaways

  • Apple Pencil Pro and the 2nd generation model pair and charge on the iPad's magnetic connector, while the USB C and 1st generation models pair through a cable.
  • Double tap, squeeze, hover and haptics are set in Settings > Apple Pencil, and Settings > Accessibility > Apple Pencil lets you slow double tap or adjust squeeze firmness.
  • If a Pencil will not pair, Apple recommends restarting the iPad, forgetting the Pencil in Bluetooth settings, charging it for a minute and removing any case.
In this story 6 sections
  1. Before You Start Pairing
  2. Check That Your Apple Pencil Works With Your iPad
  3. Pair and Charge Your Apple Pencil
  4. Set Up Double Tap, Squeeze and Hover
  5. Write by Hand and Turn It Into Text With Scribble
  6. What to Do When Your Apple Pencil Won't Pair or Write

You just unboxed an Apple Pencil, or found an old one in a drawer, and the iPad doesn't seem to notice it. This guide shows how to use Apple Pencil from the first pairing to everyday tricks like double tap, squeeze and handwriting that turns into typed text. It's written for anyone with a recent iPad (and the iPhone Duo, which works with one model). Plan on about 15 minutes, plus a few minutes of charging if the battery is flat.

Before You Start Pairing

  • Know which Pencil you have. Apple currently sells four: Apple Pencil Pro, Apple Pencil (USB C), Apple Pencil (2nd generation) and Apple Pencil (1st generation).
  • Update your iPad. Apple Pencil Pro needs iPadOS 17.5 or later, and the USB C model needs iPadOS 17.1.1 or later.
  • Turn on Bluetooth in Settings > Bluetooth. Every model connects over it.
  • Take off a thick case if the Pencil attaches magnetically. Covers can block the connector.
  • Have a USB C cable nearby for the USB C and 1st generation models.

Check That Your Apple Pencil Works With Your iPad

Most "my Pencil won't work" problems turn out to be a mismatch. Apple's Apple Pencil compatibility page is the final word, but here is the short version as of November 2026:

  1. Apple Pencil Pro works with iPad Pro 13 inch and 11 inch (M4 and M5), iPad Air 13 inch and 11 inch (M2, M3 and M4), and iPad mini (A17 Pro and A20 Pro).
  2. Apple Pencil (USB C) works with the widest range: the same iPad Pro, Air and mini models, older iPad Pro 11 inch and 12.9 inch models, iPad Air (4th and 5th generation), iPad (A16), iPad (10th generation), iPad mini (6th generation) and iPhone Duo.
  3. Apple Pencil (2nd generation) only works with iPad mini (6th generation), iPad Air (4th and 5th generation), iPad Pro 12.9 inch (3rd through 6th generation) and iPad Pro 11 inch (1st through 4th generation).
  4. Apple Pencil (1st generation) fits older iPads such as iPad (6th through 9th generation), plus iPad (A16) and iPad (10th generation) with Apple's USB C to Apple Pencil Adapter.

If you're still choosing a tablet, our iPad vs iPad Air vs iPad Pro comparison can help you pick the right model first.

Pair and Charge Your Apple Pencil

Pairing happens once. After that, the Pencil reconnects on its own.

Apple Pencil Pro and 2nd Generation

  1. Open Settings > Bluetooth and make sure it's on.
  2. Attach the Pencil to the magnetic connector on the side of the iPad. For Pencil Pro that's the long side, and for the 2nd generation it's the right side.
  3. Tap Pair when it appears. The Pencil now charges every time it sits on that connector.

Apple Pencil (USB C)

  1. Slide open the end of the Pencil to reveal its USB C port.
  2. Connect it to your iPad or iPhone Duo with a USB C cable.
  3. Tap Tap to Connect. Leave it plugged in to charge.

Apple notes that this model stays paired until you restart the device, turn off Bluetooth or pair it with something else. If it drops after a restart, plug it in again. It also attaches magnetically to the side of the iPad, but only for storage, not charging.

Apple Pencil (1st Generation)

  1. Remove the cap.
  2. On an iPad with a Lightning port, plug the Pencil straight in. On iPad (10th generation) or iPad (A16), connect the Pencil and a USB C cable to the adapter, then plug the cable into the iPad.
  3. Tap Pair.

To check the battery on any model, add the Batteries widget to your Home Screen or open Settings > Apple Pencil.

Set Up Double Tap, Squeeze and Hover

This is where a Pencil starts to feel faster than your finger. Most options live in Settings > Apple Pencil.

  1. Double tap (2nd generation and Pro): tap the Pencil twice with a finger to switch back to your last tool, such as pen to eraser. Choose what it does under Settings > Apple Pencil > Double Tap.
  2. Squeeze (Pro only): squeeze the barrel to bring up a tool palette in apps that support it. Pick the action under Settings > Apple Pencil > Squeeze.
  3. Barrel roll (Pro only): roll the Pencil while drawing to turn a shaped tip like the highlighter or fountain pen. It works in Notes, Freeform and Markup.
  4. Hover (Pro and 2nd generation on supported iPad Pro models): hold the tip up to 12 mm above the screen to preview where a mark will land. Apple says hover isn't supported with Apple Pencil (USB C) or on iPhone Duo. Turn it off in Settings > Apple Pencil if previews distract you.
  5. Haptics (Pro only): a light tap you feel during squeeze and other actions. Switch it off in Settings > Apple Pencil.

If double tap fires by accident or squeeze feels too touchy, go to Settings > Accessibility > Apple Pencil. There you can slow the double tap speed, turn double tap off, and adjust how firmly you need to squeeze, with an Extended Range option for more steps. Apple explains each slider on its double tap and squeeze accessibility page.

Write by Hand and Turn It Into Text With Scribble

Scribble lets you write in any text field (a search bar, a message, a web form) and the iPad converts your handwriting to typed text. Apple says the conversion happens on the device, so your writing stays private. If you ever need to turn it off, the switch is in Settings > Apple Pencil.

  1. Start writing in a text field. Your handwriting can spill past the edges of the box and still be read.
  2. Delete a word by scratching it out.
  3. Select text by circling or underlining it. Editing options appear.
  4. Insert words by touching and holding in a text area, then writing in the gap that opens.
  5. Join or split characters by drawing a vertical line between them.
  6. Double tap a word to select it, or triple tap to grab the whole paragraph.

In Notes and Freeform, open the tool palette and tap the Handwriting tool (just left of the pen) to use Scribble inside a drawing canvas. Apple's Scribble guide lists the supported languages.

Students weighing a tablet for note taking may also want our iPad vs MacBook for students guide.

What to Do When Your Apple Pencil Won't Pair or Write

Work through these in order. They follow Apple's own pairing troubleshooting steps.

  1. Confirm the match. Check the compatibility list above. A 2nd generation Pencil will never pair with an iPad (10th generation), for example.
  2. Reseat it. Center a Pro or 2nd generation Pencil on the magnetic connector. For a 1st generation Pencil, plug it in again.
  3. Restart the iPad with the Pencil still connected, then try again.
  4. Forget it and pair again. Go to Settings > Bluetooth, find the Pencil under My Devices, tap the info button and choose Forget this Device. Reconnect and tap Pair when it shows up after a few seconds.
  5. Give it a minute to charge. A drained Pencil may not show the Pair button. Leave it connected for one minute, then reconnect.
  6. Remove the case. A Pro or 2nd generation Pencil can't reach the connector through some covers.

If the Pair button still never appears after all of that, the Pencil or the iPad's connector may need service through Apple Support. Before you book, try the Pencil on a second compatible iPad if you can borrow one. If it pairs there, the problem is with your iPad, not the Pencil.

One last habit worth building: pick a single resting spot for your Pencil. For the Pro and 2nd generation that's the magnetic side, which keeps it charged and ready. For the other two, a weekly top up with the cable saves you from a dead Pencil right before class or a meeting. You can find more tablet and accessory guides in our gadgets section, including how the iPad compares with Samsung tablets.